Passenger Automobile and Light Truck Greenhouse Gas Emission Regulations, SOR/2010-201

Section 18.3

Allowance for certain innovative technologies

Cite as Passenger Automobile and Light Truck Greenhouse Gas Emission Regulations, SOR/2010-201, s. 18.3 · current to July 24, 2025 · regulation last amended December 15, 2023

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Subject to subsections (3) and (3.1), a company may elect to calculate an allowance for the use, in its fleet of the 2014 model year and subsequent model years, of innovative technologies that result in a measurable CO2 emission reduction and that are referred to in section 1869(b)(1) of Title 40, chapter I, subchapter C, part 86, subpart S, of the CFR, using the following formula:Σ (A × B)CwhereAis the allowance for each of those technologies that is used in the fleet, determined in accordance with section 1869(b)(1) of Title 40, chapter I, subchapter C, part 86, of the CFR and expressed in grams of CO2 per mile;Bis the number of passenger automobiles or light trucks in the fleet that are equipped with the innovative technology; andCis the total number of passenger automobiles or light trucks in the fleet. (2) Instead of determining the allowance for each innovative technology that is used in the fleet in accordance with the description of A in subsection (1), a company may (a) determine that allowance in accordance with the provisions for the 5-cycle methodology set out in section 1869(c) of Title 40, chapter I, subchapter C, part 86, of the CFR, expressed in grams of CO2 per mile; (b) use the credit value approved by the EPA for that technology under section 1869(e) of Title 40, chapter I, subchapter C, part 86, of the CFR, expressed in grams of CO2 per mile, if the company provides the Minister with evidence of that approval in its end of model year report; or (c) determine that allowance in accordance with an alternative procedure, if the company provides the Minister with evidence demonstrating that the alternative procedure allows for a more accurate determination of the emission reduction attributable to the innovative technology and that the allowance determined in accordance with that procedure more accurately represents that emission reduction. (3) If, for one of the 2014 to 2022 model years, the 2027 model year or any subsequent model year, the total of the allowances for innovative technologies that a company elects to determine, for a single vehicle, in accordance with the description of A in subsection (1) is greater than 10 grams of CO2 per mile, the company must calculate, using the following formula, the allowance for the use, in its fleet of passenger automobiles or light trucks of that model year, of innovative technologies that result in a measurable CO2 emission reduction and that are referred to in section 1869(b)(1) of Title 40, chapter I, subchapter C, part 86, subpart S, of the CFR: Σ (A × B)CwhereAis the allowance for each innovative technology for which an allowance is determined for the purposes of subsection (4);Bis the number of passenger automobiles or light trucks that are equipped with the innovative technology that is used for the purposes of subsection (4); andCis the total number of passenger automobiles or light trucks in the fleet. (3.1) If, for a model year of the 2023 to 2026 model years, the total of the allowances for innovative technologies that a company elects to determine, for a single vehicle, in accordance with the description of A in subsection (1) is greater than 15 grams of CO2 per mile, the company must calculate, using the formula set out in subsection (3), the allowance for the use, in its fleet of passenger automobiles or light trucks of that model year, of innovative technologies that result in a measurable CO2 emission reduction and that are referred to in section 1869(b)(1) of Title 40, chapter I, subchapter C, part 86, subpart S, of the CFR. (4) For the purposes of subsections (3) and (3.1), the company must perform the following calculation and ensure that the result does not exceed 10 or 15 grams of CO2 per mile, respectively:(Σ (A × Ba) × 195,264) + (Σ (A × Bt) × 225,865)(Σ Ca × 195,264) + (Σ Ct× 225,865)whereAis the allowance for each innovative technology that is used in the fleet and that the company decides to take into account, determined in accordance with subsection (1);Bais the number of passenger automobiles in the fleet that are equipped with the innovative technology in question and that the company decides to take into account;Btis the number of light trucks in the fleet that are equipped with the innovative technology in question and that the company decides to take into account;Cais the total number of passenger automobiles in the fleet; andCtis the total number of light trucks in the fleet. (5) A company may elect to calculate, using the following formula, an allowance for the use, in its fleet of passenger automobiles or light trucks, of innovative technologies — other than those referred to in subsection (1) — that result in a measurable CO2 emission reduction:Σ (A × B)CwhereAis the allowance for each innovative technology that is used in the fleet, determined in accordance with the provisions for the 5-cycle methodology set out in section 1869(c) of Title 40, chapter I, subchapter C, part 86, of the CFR and expressed in grams of CO2 per mile;Bis the number of passenger automobiles or light trucks in the fleet that are equipped with the innovative technology; andCis the total number of passenger automobiles or light trucks in the fleet. (6) If the 5-cycle methodology referred to in subsection (5) cannot adequately measure the emission reduction attributable to an innovative technology, a company may, instead of determining the allowance for the innovative technology in accordance with the description of A in subsection (5), (a) use the credit value approved by the EPA for that technology under section 1869(e) of Title 40, chapter I, subchapter C, part 86, of the CFR, expressed in grams of CO2 per mile, if the company provides the Minister with evidence of the EPA approval in its end of model year report; or (b) determine that allowance in accordance with an alternative procedure, if the company provides the Minister with evidence demonstrating that the alternative procedure allows for a more accurate determination of the emission reduction attributable to the innovative technology and that the allowance determined in accordance with that procedure more accurately represent that emission reduction.
Read the Passenger Automobile and Light Truck Greenhouse Gas Emission Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.