Maritime Occupational Health and Safety Regulations, SOR/2010-120
Section 144
Cite as Maritime Occupational Health and Safety Regulations, SOR/2010-120, s. 144 · current to February 4, 2026 · regulation last amended March 26, 2025
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The employer must provide a fall-protection system to every person, other than an employee who is installing or removing a fall-protection system, who is granted access to
(a) an unguarded work area that is
(i) more than 2.4 m above the nearest permanent safe level,
(ii) above any moving parts of machinery or any other surface or thing that could cause injury to a person on contact, or
(iii) above an open hold;
(b) a structure referred to in Part 2 that is more than 3 m above a permanent safe level; or
(c) a ladder at a height of more than 2.4 m above the nearest permanent safe level and because of the nature of the work, that person can use only one hand to hold onto the ladder.
(2) The components of a fall-protection system must meet the following standards:
(a) CSA Standard Z259.1-05, Body Belts and Saddles for Work Positioning and Travel Restraint;
(b) CSA Standard CAN/CSA-Z259.2.1-98 (R2008), Fall Arresters, Vertical Lifelines and Rails;
(c) CSA Standard CAN/CSA-Z259.2.2-98 (R2009), Self-Retracting Devices for Personal Fall-Arrest Systems;
(d) CSA Standard Z259.2.3-99 (R2004), Descent Control Devices;
(e) CSA Standard Z259.10-06, Full Body Harnesses;
(f) CSA Standard Z259.11-05, Energy Absorbers and Lanyards;
(g) CSA Standard CAN/CSA-Z259.12-01 (R2006), Connecting Components for Personal Fall Arrest Systems (PFAS);
(h) CSA Standard Z259.13-04 (R2009), Flexible Horizontal Lifeline Systems; and
(i) CSA Standard Z259.16-04 (R2009), Design of Active Fall-Protection Systems.
(3) The anchor of a fall-protection system must be capable of withstanding a force of 17.8 kN.
(4) A fall-protection system that is used to arrest the fall of a person must prevent that person
(a) from being subjected to a peak fall arrest force of more than 8 kN; and
(b) from falling freely for more than 1.2 m.
(5) An employer must train and instruct every employee required to install or remove a fall-protection system in a work place in the procedures to be followed for the installation or removal of the system.
Read the Maritime Occupational Health and Safety Regulations on the Justice Laws Website ↗
Made under Canada Labour Code, R.S.C. 1985, c. L-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.