Volatile Organic Compound (VOC) Concentration Limits for Architectural Coatings Regulations, SOR/2009-264
Section 13
Quick-dry enamel
Cite as Volatile Organic Compound (VOC) Concentration Limits for Architectural Coatings Regulations, SOR/2009-264, s. 13 · current to July 24, 2025 · regulation last amended June 17, 2019
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The set-to-touch, tack-free and dry-hard times of a quick-dry enamel set out in the schedule must be determined in accordance with ASTM D 1640–03, entitled Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature, except that the standard must be read as excluding references to any agreement between the purchaser and the seller as well as the following:
(a) sections 2, 2.1, 4 and 4.1 with the exception of Table 1 of section 4.1;
(b) sections 7.3, 7.3.1, 7.5, 7.5.1, 7.5.2, 7.7, 7.7.1, 7.8 and 7.8.1;
(c) sections 10, 10.1, except the expression “duplicate determinations should agree within 10% of the time of drying”, and 10.2.
(2) For the purpose of these Regulations, standard ASTM D 1640–03 must be read as excluding the following referenced standards:
(a) ASTM D 823; and
(b) ASTM D 1005.
(3) Any reference to a standard in this section is a reference to the version of that standard that is in effect at the time the determination under subsection (1) is made.
Read the Volatile Organic Compound (VOC) Concentration Limits for Architectural Coatings Regulations on the Justice Laws Website ↗
Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.