Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162

Section 14

Cite as Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations, SOR/2009-162, s. 14 · current to July 24, 2025 · regulation last amended March 16, 2020

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The owner or operator of chromium electroplating, chromium anodizing or reverse etching equipment must keep all records, reports, inspection and maintenance plans, floor plans depicting the location of tanks and, if applicable, the location of control devices and fans, test results and other information required by these Regulations at the facility where that equipment is located or, on notification to the Minister, at any other place in Canada where the documents can be inspected for a period of at least five years beginning on the date of their creation. (2) The person submitting the notice must specify the civic address at which the records, reports, plans, test results and other information can be inspected and identify each facility to which each of those records, reports, plans, test results and other information pertains.
Read the Chromium Electroplating, Chromium Anodizing and Reverse Etching Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.