PCB Regulations, SOR/2008-273

Section 29

Equipment and liquids for servicing equipment

Cite as PCB Regulations, SOR/2008-273, s. 29 · current to June 14, 2026 · regulation last amended June 12, 2026

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) The owner of equipment referred to in section 16, other than equipment for which an extension has been applied for under section 17 or 17.1, or of a liquid used to service equipment under subsection 15(2) must, if feasible, affix a label in a readily visible location on the equipment or on the container of the liquid, no later than 30 days after the day on which the equipment or liquid ceases to be used. (2) The owner of equipment for which an extension has been applied for under section 17 or 17.1 must, if feasible, affix a label in a readily visible location on the equipment. (3) Subsection (1) does not apply to (a) equipment or containers of liquids that bear a label on September 5, 2008 that indicates the presence of PCBs. (b) [Repealed, SOR/2025-273, s. 13] (3.1) If it is not feasible for a label to be affixed to equipment because the equipment is too small, the owner of the equipment must, if the equipment is stored, affix the label referred to in subsection (4) in a readily visible location on the container in which the equipment is stored. (4) The label must (a) state “ATTENTION — contains 50 mg/kg or more of PCBs / contient 50 mg/kg ou plus de BPC” in black lettering on a white background, in a font size of no less than 36 points; (b) measure at least 150 mm by 150 mm or at least 76 mm by 76 mm in the case of capacitors; and (c) in the case of equipment for which an extension is applied for under section 17 or 17.1, state a unique identification number.
Read the PCB Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.