PCB Regulations, SOR/2008-273
Section 17.1
Extension beyond 2026
Cite as PCB Regulations, SOR/2008-273, s. 17.1 · current to June 14, 2026 · regulation last amended June 12, 2026
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) A person may continue to use equipment referred to in subparagraph 16(1)(b)(ii) or subsection 16(2) or (2.1) until the date set out in an extension granted by the Minister under subsection (2) or (4).
(2) In the case of equipment referred to in subparagraph 16(1)(b)(ii) or subsection 16(2) or (2.1) that is located at an electrical generation, transmission or distribution facility that is scheduled for permanent closure on or before December 31, 2029, the Minister shall grant an extension up to the day on which the facility is scheduled to be permanently closed if
(a) the person submits to the Minister a written application containing the information referred to in subsection (3);
(b) the person is taking all necessary measures to minimize or eliminate any harmful effect of the PCBs in the equipment on the environment and on human health; and
(c) the equipment bears the label required under section 29, if applicable.
(3) The application shall contain the following:
(a) the name, civic and mailing addresses, telephone number, fax number, if any, and email address, if any, of the applicant and of any person authorized to act on the applicant’s behalf;
(b) a technical description of the equipment that is the subject of the application, including
(i) the type and function of the equipment,
(ii) the quantity of liquids containing PCBs in the equipment, expressed in litres, the quantity of solids containing PCBs in the equipment, expressed in kilograms, and the concentration of PCBs in the liquids and solids, expressed in mg/kg, or, if any of that information is unknown, a statement to that effect, and
(iii) the nameplate description and the manufacturer’s serial number, if any;
(c) the unique identification number that is on the label required under section 29, if applicable;
(d) the name, if any, and civic address of the facility where the equipment is located or, if there is no civic address, the location using the owner’s site identification system;
(e) information demonstrating that the facility where the equipment is located is scheduled for permanent closure on or before December 31, 2029;
(f) information demonstrating that the applicant is taking all necessary measures to minimize or eliminate any harmful effect of the PCBs that are contained in the equipment on the environment and on human health; and
(g) the applicant’s plan, along with timelines, for ending the use of the equipment.
(4) In the case of any other equipment referred to in subparagraph 16(1)(b)(ii) or subsection 16(2) or (2.1) for which it is not technically or economically feasible to end its use by December 31, 2026 — or the last day of an existing extension under this subsection, if applicable — the Minister shall grant an extension up to the date applied for but no later than five years after the last day on which the equipment would otherwise be permitted to be used if
(a) the person submits to the Minister a written application containing the information referred to in subsection (5);
(b) the person is taking all necessary measures to minimize or eliminate any harmful effect of the PCBs in the equipment on the environment and on human health; and
(c) the equipment bears the label required under section 29, if applicable.
(5) The application shall contain the following:
(a) the information referred to in paragraphs (3)(a) to (d) and (f);
(b) information demonstrating that, at the time of the application, it is not technically or economically feasible for the applicant to end their use of the equipment by the deadline referred to in subsection (4), including by removing the PCBs from the equipment; and
(c) the applicant’s detailed plan for ending the use of the equipment including, as the case may be, information relating to the replacement of the equipment or the removal of the PCBs from the equipment and the proposed approach and timelines for final destruction of the PCBs.
(6) The Minister may grant multiple extensions under subsection (4) in respect of the same equipment.
(7) The applicant shall notify the Minister in writing of any change to the information provided under subsection (3) or (5) within 30 days after the day on which the change occurs.
(8) The Minister shall refuse to grant an extension if the Minister has reasonable grounds to believe that the applicant has provided false or misleading information in support of their application.
(9) The Minister shall revoke an extension if
(a) the requirements set out in subsection (2) or (4), as the case may be, are no longer met during the period of the extension;
(b) the Minister has reasonable grounds to believe that the applicant has provided false or misleading information to the Minister in support of their application; or
(c) in the case of an extension under subsection (4), the Minister is satisfied that ending the use of the equipment has become feasible.
(10) The Minister shall not revoke an extension unless the Minister provides the applicant with
(a) written reasons for the revocation; and
(b) an opportunity to be heard, by written representation, in respect of the revocation.
Read the PCB Regulations on the Justice Laws Website ↗
Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.