Storage Tank Systems for Petroleum Products and Allied Petroleum Products Regulations, SOR/2008-197

Section 34

Cite as Storage Tank Systems for Petroleum Products and Allied Petroleum Products Regulations, SOR/2008-197, s. 34 · current to September 1, 2025 · regulation last amended August 28, 2025

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) For the installation of any storage tank system, the owner of the system must use design plans, drawings and specifications of the system that bear the stamp and signature of a professional engineer. (2) Upon the installation and before the first transfer of any petroleum products or allied petroleum products into any tank of the storage tank system, the owner of the system must ensure that as-built drawings are prepared, bear the stamp and signature of a professional engineer and show (a) the outline of all tanks; (b) the centreline of all piping; (c) the centreline of all underground electrical power and monitor sensor conduits; (d) the building foundation outlines; (e) the property lines; and (f) the secondary containment systems.
Read the Storage Tank Systems for Petroleum Products and Allied Petroleum Products Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.