Cargo, Fumigation and Tackle Regulations, SOR/2007-128
Section 362
Cite as Cargo, Fumigation and Tackle Regulations, SOR/2007-128, s. 362 · current to July 24, 2025 · regulation last amended October 31, 2021
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) This section applies in respect of wire banding or flat steel strapping that unitizes cargo when the unitized cargo is lifted using the banding or strapping.
(2) If the banding or strapping is for a single lift, it shall not be used to lift the unitized cargo more than once.
(3) If the banding or strapping is for multiple lifts, it shall not be used
(a) to lift the unitized cargo more than four times; or
(b) more than four months after the first time it is used.
(4) The banding or strapping shall not be used to lift the unitized cargo for more than four minutes at a time or any longer period that is necessary to complete the lift.
(5) The banding or strapping shall be used to lift the unitized cargo only in accordance with the lifting method indicated on the certificate under paragraph (8)(i).
(6) The knot strength of wire banding shall be at least 90% of the breaking strength of the wires.
(7) The banding or strapping shall be accompanied by a certificate that is signed by the person responsible for unitizing the cargo, that certifies the breaking strength and the safety factor of the banding or strapping and that
(a) in the case of banding, the strength of joints was tested at least once for every 1 000 tonnes of cargo unitized and at least three times for every consignment;
(b) in the case of strapping, the strength of joints was tested at least once for every 300 units; and
(c) in the case of multiple-use banding or strapping, the banding or strapping meets the requirements of section 30 of Unitized Cargo Standard, TP 11232, published by the Department of Transport, or equivalent requirements.
(8) The certificate shall also set out
(a) whether the material used to unitize the cargo is wire banding or flat steel strapping;
(b) whether the banding or strapping is single-lift or multiple-lift;
(c) the plant, warehouse or other location at which the banding or strapping was fitted on the cargo;
(d) any identifying marks on the banding or strapping;
(e) a description of the cargo;
(f) the number of units of cargo that the certificate covers;
(g) the approximate mass of the units;
(h) the unitizing system used;
(i) the lifting method that should be used, including the number and type of hooks or other lifting devices and the bridle angle, if any;
(j) in the case of banding,
(i) the number of bands fitted on each unit and how many times each band is wrapped around a unit,
(ii) the diameter and breaking strength of the wires in the banding, and
(iii) the type of knot used to tie the banding and the breaking strength of the knot;
(k) in the case of strapping,
(i) the number of straps fitted on each unit,
(ii) the width, thickness and breaking strength of the straps, and
(iii) the type and number of seals and their location and breaking strength; and
(l) if the banding or strapping has been used to lift unitized cargo, the date of the lift and the name of the vessel and of the port, if any, involved.
Read the Cargo, Fumigation and Tackle Regulations on the Justice Laws Website ↗
Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.