Cargo, Fumigation and Tackle Regulations, SOR/2007-128
Section 305
Cite as Cargo, Fumigation and Tackle Regulations, SOR/2007-128, s. 305 · current to July 24, 2025 · regulation last amended October 31, 2021
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The loose gear or main accessory gear set out in column 1 of Schedule 5 shall be tested by a competent person with a load equal to the load set out in column 2
(a) before the gear is used for the first time; and
(b) after the gear is modified or repaired and before it is used again.
(2) For the purpose of subsection (1),
(a) single-sheave pulley blocks with a becket shall be tested with the becket included in the reaving; and
(b) friction, electro-magnetic and vacuum connectors shall be tested for five minutes with the type of material that they are designed to lift.
(3) Main accessory gear shall not be tested unless the competent person has been provided with
(a) a certificate in respect of the gear that was issued under subsection 312(2) after a previous test;
(b) the design plans of the gear’s manufacturer that set out the manufacturer’s ratings for the gear, including its safe working load; or
(c) an affidavit sworn by the gear’s manufacturer or a professional engineer that attests to its safe working load and compliance with the requirements of section 317 in respect of safety factors at that safe working load.
(4) Gear passes the test if it is does not break and no defects or signs of permanent deformation are detected.
Read the Cargo, Fumigation and Tackle Regulations on the Justice Laws Website ↗
Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.