Cargo, Fumigation and Tackle Regulations, SOR/2007-128
Section 135
Cite as Cargo, Fumigation and Tackle Regulations, SOR/2007-128, s. 135 · current to July 24, 2025 · regulation last amended October 31, 2021
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) For the purpose of 4.5.1 of the Timber Code, all lashings used for the securing of timber shall be tested by a competent person to determine whether they
(a) meet the requirements of 4.1.2 of the Code;
(b) in the case of chains, have a link weld capable of a 90° cold bend without separation; and
(c) in the case of flexible steel wire ropes, are at least 16 mm in diameter.
(2) For the purpose of 4.5.1 of the Timber Code, all components used for the securing of timber shall be tested by a competent person to determine whether they
(a) meet the requirements of 4.1.2.2 and 4.1.2.3 of the Code; and
(b) have a breaking strength of at least 14 100 kg.
(3) For the purpose of 4.5.1 of the Timber Code, if lashings or components meet the requirements referred to in subsection (1) or (2), as the case may be, the competent person shall
(a) mark each of them in a distinctive manner that indicates the month and year of testing; and
(b) sign and issue a certificate that sets out
(i) the distinguishing mark,
(ii) a description of the lashings or components,
(iii) the date of testing,
(iv) the number of similar lashings or components tested on that date,
(v) the proof load,
(vi) the original breaking strength,
(vii) their name and
(A) if they are an employee, the name and address of their employer, or
(B) if they are not an employee, their address, and
(viii) the qualifications that qualify them as a competent person.
(4) For the purpose of 4.5.1 of the Timber Code,
(a) the lashings and components in respect of which a certificate is issued under paragraph (3)(b) shall be re-tested by a competent person at least once every four years after the day on which the certificate is issued to determine whether or not they exhibit permanent deformation after having been subjected to a proof load of at least 40% of their original breaking strength; and
(b) if the lashings or components do not exhibit permanent deformation in the test, the competent person may sign and issue a certificate that sets out the information specified in paragraph (3)(b).
(5) For the purpose of 4.5.1 of the Timber Code, if, when a visual examination under 4.5.3 of the Timber Code or section 138 is made, the diameter of a section of a lashing or component appears to be reduced by 5% or more from its original diameter, any certificate issued in respect of the lashing or component is invalid unless
(a) if the reduction is 10% or less, the lashing or component is re-tested by a competent person subjecting it to a proof load of at least 40% of its original breaking strength and it does not exhibit permanent deformation; or
(b) if the reduction is more than 10%, a representative sample of the lashing or component, or of another lashing or component in respect of which the same certificate applies and that has a similar reduction in a section of its diameter, is tested by a competent person to destruction and has a breaking strength of at least 133 kN.
(6) For the purpose of 4.5.1 of the Timber Code, if, when a visual examination under 4.5.3 of the Timber Code or section 138 is made, the cross-sectional area of a section of a lashing or component appears to be reduced by 10% or more from its original area, any certificate issued in respect of the lashing or component is invalid unless
(a) if the reduction is 20% or less, the lashing or component is re-tested by a competent person subjecting it to a proof load of at least 40% of its original breaking strength and it does not exhibit permanent deformation; or
(b) if the reduction is more than 20%, a representative sample of the lashing or component, or of another lashing or component in respect of which the same certificate applies and that has a similar reduction in a section of its cross-sectional area, is tested by a competent person to destruction and has a breaking strength of at least 133 kN.
(7) For the purpose of 4.5.1 of the Timber Code, any certificate issued in respect of a web lashing is invalid if when a visual examination under 4.5.3 of the Timber Code or section 138 is made it appears that
(a) the length of an edge cut exceeds the lashing’s thickness;
(b) the depth of an abrasion is more than 15% of the lashing’s thickness, taken as a proportion of all plies;
(c) the total depth of abrasions on both sides of the lashing is more than 15% of the lashing’s thickness, taken as a proportion of all plies;
(d) the depth of the warp thread damage is 50% or less of the lashing’s thickness and the damage
(i) is within 25% of the width of the lashing from its edge, or
(ii) is over an area that is more than 25% of the lashing’s width;
(e) the depth of the warp thread damage is more than 50% of the lashing’s thickness and the damage
(i) is within 25% of the width of the lashing from its edge, or
(ii) is over an area that is more than 12.5% of the lashing’s width;
(f) weft thread damage allows warp threads to separate over an area that is wider than 25% of the lashing’s width and longer than twice its width;
(g) any part of the lashing is melted, charred or damaged by chemicals;
(h) load-bearing stitches are broken or worn; or
(i) the web-lashing is damaged in such a way that the total effect of the damage on the lashing is approximately the same as the effect of any of the types of damage referred to in paragraphs (a) to (h).
(8) In this section, competent person means a professional engineer or a person with similar qualifications.
Read the Cargo, Fumigation and Tackle Regulations on the Justice Laws Website ↗
Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.