Marine Personnel Regulations, SOR/2007-115

Section 145

Cite as Marine Personnel Regulations, SOR/2007-115, s. 145 · current to July 24, 2025 · regulation last amended December 20, 2023

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) An applicant for a Second-class Engineer, Motor Ship or Steamship certificate who holds a Fourth-class Engineer certificate with STCW endorsement or a Third-class Engineer certificate for the same type of vessel to which the certificate sought relates shall meet the requirements set out in column 1 of the table to this subsection and the corresponding specifications set out in column 2.TABLEItemColumn 1Column 2RequirementsSpecifications1Hold a certificateFourth-class Engineer certificate with STCW endorsement.2ExperienceAfter acquiring the qualifying service required for a Third-class Engineer, Motor Ship or Steamship certificate, acquire at least 12 months of additional qualifying service as follows:(a) at least 6 months of sea service as engineer in charge of the engineering watch or in charge of machinery on one or more of the following vessels that have a propulsive power of at least 750 kW:(i) on board a motor vessel other than a stationary MOU, in the case of an applicant for a motor ship certificate, or(ii) on board a steamship, in the case of an applicant for a steamship certificate;(b) up to 3 months of qualifying service in respect of attendance at a program or course, other than an approved training course, at a maximum rate of one day of service for every three days of attendance, if(i) the program or course substantially covers the subject-matter of at least one of the examinations referred to in item 4, and(ii) the applicant provides a testimonial indicating that the applicant has successfully completed that program or course; and(c) any remaining time in any combination of the following types of service on one or more of the following vessels that have a power of at least 750 kW:(i) service as an engineer on board a steamship or motor vessel,(ii) service as an engineer on board an MOU that does not have a propulsion system accrued at a rate of one-half the time served counting as qualifying service, and(iii) up to 3 months of qualifying service in respect of time spent in laying up, fitting out or refitting a vessel at a rate of a maximum of one day of qualifying service for each calendar day of at least 8 hours of work.3Certificates to be provided to the examiner(a) MED with respect to STCW basic safety;(b) MED training with respect to proficiency in survival craft and rescue boats other than fast rescue boats;(c) MED in advanced fire fighting;(d) MED for senior officers;(e) marine advanced first aid; and(f) ship management practices taught using a propulsive plant simulator.4Pass examinations(a) The following written examinations at the second-class engineer level, while holding a Fourth-class Engineer certificate:(i) applied mechanics,(ii) thermodynamics,(iii) electrotechnology,(iv) naval architecture, and(v) technical drawing;(b) after providing the certificate referred to in paragraph 3(f), an examination on ship management practices using a propulsive plant simulator;(c) written examination on general engineering knowledge at the second-class level, after meeting the requirements of items 2 and 3 and paragraphs (a) and (b);(d) one of the following written examinations at the second-class level, after meeting the requirements of paragraph (c):(i) engineering knowledge of motor vessels, in the case of an applicant for a Second-class Engineer, Motor Ship certificate, or(ii) engineering knowledge of steamships, in the case of an applicant for a Second-class Engineer, Steamship certificate; and(e) oral examination on the knowledge set out in paragraphs (a) to (d) and a knowledge of the legislation relevant to the certificate sought, after passing the examination referred to in paragraph (d). (2) An applicant for a Second-class Engineer, Motor Ship certificate who holds a First-class or Second-class Engineer, Steamship certificate shall (a) after obtaining a Fourth-class Engineer, Motor Ship or Steamship certificate, acquire at least 6 months of service as an engineer on one or more motor vessels that have a propulsive power of at least 750 kW other than stationary MOUs; and (b) pass a written and an oral examination to determine whether they have the engineering knowledge required by subparagraph 4(d)(i) of the table to subsection (1). (3) An applicant for a Second-class Engineer, Steamship certificate who holds a First-class or Second-class Engineer, Motor Ship certificate shall (a) after obtaining a Fourth-class Engineer, Motor Ship or Steamship certificate, acquire at least 6 months of service as an engineer on one or more steamships that have a propulsive power of at least 750 kW; and (b) pass a written and an oral examination to determine whether they have the engineering knowledge required by subparagraph 4(d)(ii) of the table to subsection (1).
Read the Marine Personnel Regulations on the Justice Laws Website ↗

Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.