Firearms Marking Regulations, SOR/2004-275
Section 4
Cite as Firearms Marking Regulations, SOR/2004-275, s. 4 · current to November 20, 2025 · regulation last amended November 6, 2025
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The firearm shall be marked by permanently stamping or engraving on the firearms’s frame or receiver the word “Canada” or the letters “CA” and
(a) in the case of a manufactured firearm, the name of the manufacturer and the firearm’s serial number; and
(b) in the case of an imported firearm, the last two digits of the year of the importation.
(2) The markings shall
(a) be legible;
(b) have a depth of at least 0.076 mm and a height of at least 1.58 mm; and
(c) subject to subsection (3), be visible without the need to disassemble the firearm.
(3) In the case of an imported firearm, the Registrar, on application by the individual, business or public service agency that is importing it, shall grant the applicant an exemption from the requirement set out in paragraph (2)(c) if
(a) marking the firearm in a place that is visible only by disassembling the firearm is consistent with the current practices of the manufacturer of that model of firearm;
(b) the firearm does not provide a visible space suitable to stamp or engrave the markings;
(c) the firearm is rare;
(d) the firearm is of a value that is unusually high for that type of firearm and that value would be significantly reduced if the markings were visible without disassembly; or
(e) the firearm is imported by a business that holds a licence for the purpose of using the firearm in respect of motion picture, television, video or theatrical productions or in publishing activities.
Read the Firearms Marking Regulations on the Justice Laws Website ↗
Made under Firearms Act, S.C. 1995, c. 39.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.