Gasoline and Gasoline Blend Dispensing Flow Rate Regulations, SOR/2000-43

Section 4

Cite as Gasoline and Gasoline Blend Dispensing Flow Rate Regulations, SOR/2000-43, s. 4 · current to July 24, 2025 · regulation last amended March 22, 2006

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) A person shall determine the flow rate referred to in section 3 by measuring the amount of time it takes to dispense 10.0 L of gasoline or a gasoline blend from the nozzle with the nozzle operated at the maximum flow rate. (2) In making the determination referred to in subsection (1), the person shall (a) use a digital stopwatch that reads to at least 0.01 seconds to measure the dispensing time; (b) use the dispenser’s volume meter to measure the dispensed volume of gasoline or gasoline blend; and (c) start the stopwatch when the dispenser’s volume meter indicates that 2.0 L of gasoline or gasoline blend have been dispensed. (3) The person shall use the following formula to calculate the dispensing flow rate of gasoline or a gasoline blend from the nozzle, in litres per minute:Flow Rate = 60 × [Vf - Vi]/[Tf - Ti]whereTiis the reading of the stopwatch, in seconds, when the person starts the stopwatch;Tfis the reading of the stopwatch, in seconds, when the person stops the stopwatch;Viis the reading of the dispenser’s volume meter, in litres, when the person starts the stopwatch; andVfis the reading of the dispenser’s volume meter, in litres, when the person stops the stopwatch.
Read the Gasoline and Gasoline Blend Dispensing Flow Rate Regulations on the Justice Laws Website ↗

Made under Canadian Environmental Protection Act, 1999, S.C. 1999, c. 33.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.