Specifications Relating to Non-automatic Weighing Devices (1998), SI/98-81
Section 49
Cite as Specifications Relating to Non-automatic Weighing Devices (1998), SI/98-81, s. 49 · current to July 24, 2025 · regulation last amended June 17, 2019
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The information set out in column I of the table to this section shall be marked, using appropriate words or the symbols set out in column II of that table, on the weighing devices and modules described in columns III to VI of that table.TABLEColumn IColumn IIColumn IIIColumn IVColumn VColumn VIInformationSymbolsModules in the same housingIndicating elements tested separatelyWeighing and load-receiving elements tested separatelyOther equipment and accessories approved separatelyManufacturer, applicant or importer’s name or trademark– – –yesyesyesyesModel number– – –yesyesyesyesDistinctive serial number– – –yesyesyesyesApproval number– – –yesyesyesyesAccuracy classOval outline with the text I inside, Oval outline with the text II inside, Oval outline with the text III inside, Oval outline with the text IIIHD inside or Oval outline with the text IIII insideyesyesyes– – –Maximum capacityMaxyesyesyes– – –Verification scale intervaleyesyes– – –– – –Actual scale interval, if different from the verification scale intervaldyesyes– – –– – –Minimum verification scale intervalemin– – –– – –yes– – –Maximum number of verification scale intervalnmax– – –yesyes– – –Temperature range, if different from -10°C to 40°C– – –yesyesyes– – –
(2) In this section,
(a) Modules in the same housing includes
(i) indicating elements, and weighing and load-receiving elements in the same housing, and
(ii) a weighing device composed of modules and approved as a single unit where the modules are not intended to be separated and interfaced with other modules approved separately;
(b) Indicating elements tested separately includes individually-approved indicating elements that may be attached to other approved modules;
(c) Weighing and load-receiving elements tested separately includes individually-approved weighing and load-receiving elements that may be attached to approved modules; and
(d) Other equipment and accessories approved separately includes other equipment and accessories that perform metrological functions and that can be tested and approved separately.
(3) In the case of the elements described in column IV of the table to this section, the maximum capacity and the actual scale interval shall be marked as required by paragraph 52(b) at the time they are attached to other modules to form a weighing device.
Read the Specifications Relating to Non-automatic Weighing Devices (1998) on the Justice Laws Website ↗
Made under Weights and Measures Act, R.S.C. 1985, c. W-6.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.