Specifications Relating to Non-automatic Weighing Devices (1998), SI/98-81

Section 14

Cite as Specifications Relating to Non-automatic Weighing Devices (1998), SI/98-81, s. 14 · current to July 24, 2025 · regulation last amended June 17, 2019

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

With respect to non-automatic indicating devices, the addition or removal of a load equal to the applicable in-service limits of error for the load placed on the weighing and load-receiving element, but not exceeding two verification scale intervals, shall cause (a) in the case of a weigh-beam or beam-over-pan scale that is without a supplementary indicating element and (i) is equipped with a trig loop, a movement in the position of the weigh-beam from the centre position to either limit of the trig loop, and (ii) is not equipped with a trig loop, the position of rest of the weigh-beam or lever system to change from the horizontal position or midway between limiting stops to either limit of motion; and (b) in the case of a weigh-beam or beam-over-pan scale that has a supplementary indicating element that has graduations without specific values, the position of the indicator to change (i) in the case of a Class Oval outline with the text I inside or Oval outline with the text II inside device, by at least 1 mm (0.04 in.), (ii) in the case of a Class Oval outline with the text III inside or Oval outline with the text IIII inside device with a maximum capacity not exceeding 30 kg (70 lb.), by at least 2 mm (0.08 in.), and (iii) in the case of a Class Oval outline with the text III inside or Oval outline with the text IIII inside device with a maximum capacity greater than 30 kg (70 lb.), or a Class Oval outline with the text IIIHD inside device, by at least 5 mm (0.2 in.).
Read the Specifications Relating to Non-automatic Weighing Devices (1998) on the Justice Laws Website ↗

Made under Weights and Measures Act, R.S.C. 1985, c. W-6.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.