Metering Assemblies Incorporating Electronic ATCs Specifications, SI/90-155

Section 19

Cite as Metering Assemblies Incorporating Electronic ATCs Specifications, SI/90-155, s. 19 · current to July 24, 2025 · regulation last amended June 17, 2019

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Where the section of pipe, or other component, containing test liquid and the temperature sensor in a metering assembly incorporating an ATC have first been stabilized at ambient temperature and where test liquid at a temperature approximately 20°C higher or lower than ambient temperature is suddenly caused to flow through the pipe section at a mean velocity of approximately 3 m/s, the temperature sensor shall respond to at least 90 per cent of the variation in the temperature of the liquid (a) within 15 seconds, in the case of motor fuel dispensers; and (b) within 20 seconds, in the case of any other type of meter. (2) For the purposes of subsection (1), the test liquid shall be mineral spirits or any other liquid with similar physical properties.
Read the Metering Assemblies Incorporating Electronic ATCs Specifications on the Justice Laws Website ↗

Made under Weights and Measures Act, R.S.C. 1985, c. W-6.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.