Specifications Relating to Timber Dimension Measuring Devices, SI/2024-48

Section 4

Influence factors

Cite as Specifications Relating to Timber Dimension Measuring Devices, SI/2024-48, s. 4 · current to July 24, 2025 · regulation last amended October 23, 2024

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

A timber dimension measuring device must perform within the applicable limits of error referred to in section 3 when, under controlled conditions, the device is tested while it is exposed to an influence factor, such as: (a) if the device is powered by alternating current, a voltage that is within the range of -15% to +10% of the nominal voltage of the device; (b) if the device is powered by direct current, (i) a voltage that is less than the nominal voltage of the device and at which voltage the device can produce a measurement registration, and (ii) a voltage that is up to 10% greater than the nominal voltage of the device; (c) a temperature that is (i) in the case where the temperature range specified for the device by the manufacturer is a range that spans at least 30°C and is entirely within the default temperature range, that specified temperature range, and (ii) in any other case, the default temperature range; (d) a humidity level of up to 85% relative humidity and a temperature that is (i) in the case where the temperature range specified for the device by the manufacturer is a range that spans at least 30°C and is entirely within the default temperature range, that specified temperature range, and (ii) in any other case, the default temperature range; (e) if the device measures using optical principles, an ambient light level that is within the range of 100 lx to 100 000 lx; and (f) if the device measures using acoustic principles, an acoustic interference of up to 100 dB at the nominal centre frequency of the device’s ultrasonic transducers.
Read the Specifications Relating to Timber Dimension Measuring Devices on the Justice Laws Website ↗

Made under Weights and Measures Act, R.S.C. 1985, c. W-6.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.