Specifications Relating to Timber Dimension Measuring Devices, SI/2024-48
Section 29
Marking — general
Cite as Specifications Relating to Timber Dimension Measuring Devices, SI/2024-48, s. 29 · current to July 24, 2025 · regulation last amended October 23, 2024
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The following information must be permanently marked in a clearly visible location on a timber dimension measuring device or on a descriptive plate that is affixed to the device:
(a) the approval number assigned to the class, type or design of the device in accordance with paragraph 17(c) of the Weights and Measures Regulations;
(b) the name of the device’s manufacturer;
(c) the device’s model designation;
(d) the device’s serial number;
(e) for each axis of measurement that the device is capable of measuring in the location where it is installed,
(i) the minimum and maximum dimensions for each measuring range on that axis, and
(ii) the interval for each measuring range on that axis;
(f) the number of scan heads installed on the device;
(g) the device’s minimum and maximum operating speeds as installed;
(h) the minimum distance, in centimetres or metres, between each log measured; and
(i) the temperature range specified for the device by the manufacturer, if any.
(2) Despite paragraph (1)(i), a temperature range specified for the device by the manufacturer must not be marked on it or the descriptive plate unless the range spans at least 30°C and is entirely within the default temperature range.
Read the Specifications Relating to Timber Dimension Measuring Devices on the Justice Laws Website ↗
Made under Weights and Measures Act, R.S.C. 1985, c. W-6.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.