Weights and Measures Regulations, C.R.C., c. 1605

Section 224

Cite as Weights and Measures Regulations, C.R.C., c. 1605, s. 224 · current to July 24, 2025 · regulation last amended September 20, 2024

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

When a machine is tested in relation to a relevant local standard for either acceptance limits of error or in-service limits of error by measurement of a known area on a surface that is representative of the kind of material for which the machine is designed, the machine is within both the acceptance limit of error and the in-service limit of error in respect of that area and that kind of material if the area registered does not differ from the known area by more than 0.006 square metres or 1.5 per cent of the known area, whichever is greater, and, in the case of a machine measuring in Canadian units of measurement, 1/16 square foot or 1.5 per cent of the known area, whichever is greater.
Read the Weights and Measures Regulations on the Justice Laws Website ↗

Made under Weights and Measures Act, R.S.C. 1985, c. W-6.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.