Weights and Measures Regulations, C.R.C., c. 1605

Section 191

Cite as Weights and Measures Regulations, C.R.C., c. 1605, s. 191 · current to July 24, 2025 · regulation last amended September 20, 2024

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) Where a railway track scale that is designed for the in-motion weighing of individual coupled railway cars forming a train, and is used solely for determining transportation charges for commodities, is tested dynamically, the acceptance limits of error and in-service limits of error for the scale are the following: (a) at least 70 per cent of the individual weights of the reference cars shall be within 0.2 per cent of the known individual static weight of those reference cars; (b) not more than five per cent of the individual weights of the reference cars shall differ by more than 0.5 per cent from the known individual static weights of those reference cars; and (c) the weight of an individual reference car shall not differ by more than one per cent from the known static weight of that reference car. (2) Where a railway track scale referred to in subsection (1), used for a purpose other than determining transportation charges for commodities, is tested dynamically, the acceptance limit of error and in-service limit of error for each dynamic weighing are 0.15 per cent of the net known test load. (3) The tests referred to in subsections (1) and (2) shall not be conducted more than 10 times. (4) The reference cars and the length of the train used in the tests referred to in subsections (1) and (2) shall be representative of the types and weight range of the railway cars and length of the trains for which the railway track scale is intended to be used.
Read the Weights and Measures Regulations on the Justice Laws Website ↗

Made under Weights and Measures Act, R.S.C. 1985, c. W-6.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.