Weights and Measures Regulations, C.R.C., c. 1605
Section 132
Cite as Weights and Measures Regulations, C.R.C., c. 1605, s. 132 · current to July 24, 2025 · regulation last amended September 20, 2024
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
The indicating element of an analogue type of indicator and the imprint of an analogue printer of a machine shall conform to the following specifications:
(a) the indicating portion of a poise or pointer and its relation to any associated series of graduations shall be such that there will be no confusion as to the quantity indicated or printed;
(b) the indicating portion of a poise or pointer shall reach but shall not obscure the finest graduation with which it is used;
(c) if the indicating portion of a pointer and the graduations are in the same plane, there may be a distance of not more than 1.0 mm or 0.04 inch between the end of the indicating portion and the end of the graduations, the distance being measured along the line of the graduations;
(d) the width of an indicating line or of the indicating portion of a pointer shall not be greater than the width of the narrowest graduation with which it is used; and
(e) the clearance between an indicating line or the indicating portion of a pointer and the reading surface of the graduations shall not be more than 1.5 mm or 0.06 inch unless adequate provision is made to prevent errors due to parallax.
Read the Weights and Measures Regulations on the Justice Laws Website ↗
Made under Weights and Measures Act, R.S.C. 1985, c. W-6.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.