Canal Regulations, C.R.C., c. 1564
Section 77.15
Cite as Canal Regulations, C.R.C., c. 1564, s. 77.15 · current to July 24, 2025 · regulation last amended September 5, 2008
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The mooring lines of every vessel shall
(a) be of a uniform thickness throughout their length;
(b) be fitted with a spliced eye not less than 2.44 m long;
(c) have sufficient strength to check the vessel; and
(d) be arranged so that they may be led to either side of the vessel as required.
(2) Unless otherwise permitted by an officer, only wire rope mooring lines shall be used for securing a vessel in lock chambers.
(3) Synthetic lines may be used for mooring at approach walls, tie-up walls and docks if they have a breaking strength that complies with the minimum specifications set out in the table to this section.
(4) Every vessel of 38.1 m or less in overall length shall have at least two good and sufficient mooring lines or hawsers that are so arranged as to lock the vessel under control and in safety.
(5) Every vessel of more than 38.1 m in overall length shall have at least four good and sufficient mooring lines or hawsers that are so arranged as to lock the vessel under control and in safety.TABLEItemColumn IColumn IIColumn IIIVessel LengthLength of Mooring LineBreaking Strength138 m to 61 m110 m89 kN262 m to 91 m110 m134 kN392 m to 121 m110 m178 kN4122 m to 182 m110 m250 kN5183 m to 223 m110 m312 kN
Read the Canal Regulations on the Justice Laws Website ↗
Made under Department of Transport Act, R.S.C. 1985, c. T-18.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.