Canal Regulations, C.R.C., c. 1564

Section 26

Cite as Canal Regulations, C.R.C., c. 1564, s. 26 · current to July 24, 2025 · regulation last amended September 5, 2008

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) No vessel shall attempt to enter or leave a lock until the gates are fully opened, and the engines shall be stopped while the propeller wheel is passing over the mitre sills. (2) The rate of speed of any vessel on entering a lock, when the bow of the vessel has reached the open gates, shall be such that the vessel can be moved into position by her lines alone without depending on the propeller wheel, and the engine shall be stopped when the bow of the vessel has reached the middle of the lock between the upper and lower gates; the remaining distance to be travelled shall be by means of lines attached to winches installed on the vessel’s deck. (3) Any vessel, while entering, locking or leaving a lock shall be so controlled as to prevent damage by the vessel to the lock structure and auxiliary equipment.
Read the Canal Regulations on the Justice Laws Website ↗

Made under Department of Transport Act, R.S.C. 1985, c. T-18.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.