Canada Oil and Gas Drilling and Production Regulations, C.R.C., c. 1517
Section 63
Cite as Canada Oil and Gas Drilling and Production Regulations, C.R.C., c. 1517, s. 63 · current to July 24, 2025 · regulation last amended March 22, 2006
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Each platform erected on the inside of every derrick, except stabbing boards, shall completely cover the space from the working edge of the platform back to the legs and girts of the derrick.
(2) The decking plank on the working side of each platform shall be secured to the derrick girts with U and J bolts.
(3) Each working platform shall be equipped with a wire rope not less than 1/2 inch in diameter securely fastened under and over the platform with U or J bolts, both ends being secured to the same girt of the derrick.
(4) Stabbing boards shall be constructed of not less than one fir plank three inches by 12 inches and one reinforcing plank two inches by 12 inches or of material of equal strength; all planks shall be free of knots or other defects and shall project at least 12 inches beyond the support on which they rest; pieces of not less than two-inch angle iron shall be bolted near the ends of the three-inch by 12-inch board, either inside or outside the girt supporting the board, and in addition, each end of the board shall be fastened to the derrick with a safety line of 1/2 inch diameter wire rope securely fastened to the inside of the board with U or J bolts at a point not exceeding three feet towards the centre from the girts.
(5) The supports on opposite sides of a derrick on which the stabbing board is placed shall be reasonably level, rigid, horizontal and securely fastened.
Read the Canada Oil and Gas Drilling and Production Regulations on the Justice Laws Website ↗
Made under Territorial Lands Act, R.S.C. 1985, c. T-7.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.