Canada Oil and Gas Drilling and Production Regulations, C.R.C., c. 1517
Section 49
Cite as Canada Oil and Gas Drilling and Production Regulations, C.R.C., c. 1517, s. 49 · current to July 24, 2025 · regulation last amended March 22, 2006
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Where an application is made to inject fluids into an underground reservoir, the Minister may authorize or refuse to authorize such action.
(2) The application shall set forth
(a) the location of each intake well;
(b) the location of all oil and gas wells, including abandoned and drilling wells and dry holes and the names of permittees or lessees within two miles of each intake well;
(c) the formations from which wells are producing or have produced;
(d) the name, description and depth of each formation in which fluid is to be injected;
(e) the well completion program and the depth of the casing shoe or liner below which it is to be injected;
(f) the elevations of the top of the formation into which the fluid is to be injected in the intake well and the wells producing from the same formation within a two-mile radius of each intake well;
(g) a log of each intake well or such information as is available;
(h) a description of the fluid, stating the kind, where obtained and the estimated amounts to be injected daily;
(i) the name and address of the applicant or person to be in charge of the injection operation; and
(j) such other information as the Oil Conservation Engineer may require to ascertain whether the injection may be safely and legally made.
(3) Application may be made to include the use of more than one intake well.
(4) Each application shall be executed by the lessees who are willing to participate in the proposed operations.
(5) Upon approval of the Minister, the applicant or the person in charge of injection operations shall notify the Oil Conservation Engineer
(a) of the date of commencement of such operations; and
(b) within the 10 days next following the discontinuance of such operations, together with reasons in writing in respect of such discontinuance.
(6) Each well used for the injection of gas or water into a producing formation shall be cased with sound casing so as not to permit leakage, and the casing shall be cemented so that damage will not be caused to oil, gas or fresh water reservoirs.
(7) The lessee of an intake well shall keep an accurate record of
(a) the amount of fluid injected into the intake well;
(b) the source of fluid injected; and
(c) the pressure used in injection of the fluid.
Read the Canada Oil and Gas Drilling and Production Regulations on the Justice Laws Website ↗
Made under Territorial Lands Act, R.S.C. 1985, c. T-7.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.