Canada Oil and Gas Drilling and Production Regulations, C.R.C., c. 1517

Section 35

Cite as Canada Oil and Gas Drilling and Production Regulations, C.R.C., c. 1517, s. 35 · current to July 24, 2025 · regulation last amended March 22, 2006

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

(1) A well producing gas shall be equipped with a gas meter of a type approved by the Oil Conservation Engineer, and no gas shall be produced at a well unless it is metered or the Oil Conservation Engineer gives permission to dispense with a meter. (2) Each orifice meter shall be installed in accordance with the regulations made under the Gas Inspection Act. (3) Where gas from several wells is brought to a common point for metering, each meter shall be marked clearly to indicate the source of gas being measured. (4) Any by-pass around a meter shall be closed by valves or stop-cocks that effectively stop all flow of gas when closed, and, on every occasion when the by-pass is operated and on any extraordinary occasion where gas does not reach the meter, a suitable entry shall be made on the meter chart. (5) Whenever an orifice plate is installed or changed, a record of the time and the size of the orifice removed and inserted shall be recorded on the meter chart. (6) Each orifice meter-run installed shall be equipped with a thermometer well and pressure gauge connection. (7) The measured inside diameter of the pipe at the orifice shall be clearly marked on the pipe near the orifice flanges. (8) The orifice plate shall show clearly the size of orifice, in inches and decimals, by figures stamped or cut into the metal of the plate, and a plate shall not be rebored or the orifice size increased without first removing or permanently defacing the old marking. (9) Each meter shall be maintained in good and usable condition. (10) Purchasers shall keep meter charts and records of gas purchased in a permanent file for a period of at least two years and such information shall be made available to the Oil Conservation Engineer at his request.
Read the Canada Oil and Gas Drilling and Production Regulations on the Justice Laws Website ↗

Made under Territorial Lands Act, R.S.C. 1985, c. T-7.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.