Fishing Vessel Safety Regulations, C.R.C., c. 1486
Section 18
Cite as Fishing Vessel Safety Regulations, C.R.C., c. 1486, s. 18 · current to July 24, 2025 · regulation last amended December 20, 2023
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Subject to subsection (2), where the propulsion shafting of a fishing vessel is driven by a diesel or a gasoline engine, the intermediate shaft shall
(a) be made of material having a tensile strength of not less than 372 MPa; and
(b) have a diameter not less than that obtained by the following formula:d = 106.41 cubic root (H/R) x [cubic root (414/S) or 0.85, whichever is the greater]whered =diameter of the intermediate shaft in millimetres,H =brake kilowatt power of the engine at continuous rating,R =revolutions per minute of the intermediate shaft at continuous rating,S =tensile strength of the intermediate shaft material in megapascals.
(2) Where a fishing vessel is operated exclusively in fresh water, the diameter of the intermediate shaft may be 1.75 per cent less than the diameter obtained by the formula set out in subsection (1).
(3) Where the propulsion shafting of a fishing vessel is not driven by a diesel or gasoline engine, the size of the intermediate shaft shall conform to the recommended practices and standards.
Read the Fishing Vessel Safety Regulations on the Justice Laws Website ↗
Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.