Hull Construction Regulations, C.R.C., c. 1431

Section 83

Cite as Hull Construction Regulations, C.R.C., c. 1431, s. 83 · current to July 24, 2025 · regulation last amended December 20, 2023

Statute Watch

Get an alert when a bill in Parliament would change this section, and every time it moves.

The text

The requirements for fuel oil tanks that do not form an integral part of the ship’s structure and have a capacity of more than 4 500 L are as follows: (a) the outside plating shall be fitted with stiffeners so that the area of the unsupported flat surface of a plate whose thickness is set out in column I of an item of the table to this section does not exceed the area set out in column II of the item; (b) the following shall be fitted to each tank, namely, (i) wash plates, if required, (ii) doublers or striking plates, under all sounding pipes, (iii) in the case of riveted construction, drip trays, and (iv) manholes whose covers are secured by 16-mm studs spaced apart at a distance of 70 mm or less, centre to centre; (c) if drains are fitted, they shall be of the weighted-lever or other self-closing type; (d) every air pipe to a tank shall (i) be carried well above deck, (ii) have an outlet that is (A) in a safe location, and (B) fitted with readily removable wire-gauze screens, the total area of clear opening of the screens being not less than the cross-sectional area of the air pipe, and (iii) have a net area that (A) in the case of a tank that can be filled by the ship’s pumps or by shore pumps, is greater than the effective area of the corresponding filling pipe by at least 25 per cent; and (B) in any other case, is at least equal to the effective area of the corresponding filling pipe; and (e) on completion of its fitting, every tank shall be tested in the presence of a steamship inspector by filling it with water to a head that is equal to the maximum head to which the tank will be subjected or a head of 2.44 m above the tank crown, whichever is greater.TABLEColumn IColumn IIItemThickness of Plate (mm)Unsupported Flat Surface Area (m2)15.000.5626.500.8438.001.12
Read the Hull Construction Regulations on the Justice Laws Website ↗

Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.

Bills in Parliament that would change this section 0

No bill we hold would amend or repeal this section.