Hull Construction Regulations, C.R.C., c. 1431
Section 37
Cite as Hull Construction Regulations, C.R.C., c. 1431, s. 37 · current to July 24, 2025 · regulation last amended December 20, 2023
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) The provisions specified in subsection 22(3) of Part I relating to issuance of subdivision load line certificates shall apply to ships of Class VI and Class VII that are 150 tons, gross tonnage, or over to which this Part applies.
(2) The requirements for marking of subdivision load lines as specified in subsection 22(2) of Part I shall apply to ships of Class VI and Class VII that are 150 tons, gross tonnage, or over, except that references in paragraph 22(2)(c) to “the disc” shall read “the disc or diamond”; ships of Class VI and Class VII that make voyages to the United States on the Great Lakes shall be marked in similar manner to that specified in paragraphs 22(2)(a) and (b).
(3) Subdivision load line certificates will not be issued to ships of Class III, IV, VI or VII that are less than 150 tons, gross tonnage, nor shall such certificates be issued to any ship of Class V or Class VIII regardless of gross tonnage; in the case of such ships, a letter stating the maximum load draft at which the ship is permitted to operate will be issued; this letter shall be posted in the wheel house, under glass, adjacent to the inspection certificate.
Read the Hull Construction Regulations on the Justice Laws Website ↗
Made under Canada Shipping Act, 2001, S.C. 2001, c. 26.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.