Precious Metals Marking Regulations, C.R.C., c. 1303
Section 14
Cite as Precious Metals Marking Regulations, C.R.C., c. 1303, s. 14 · current to July 24, 2025 · regulation last amended June 17, 2019
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Where a quality mark specified in Column I of item 1 or 2 of the table to section 7 or in Column I of item 1 or 2 of the table to section 10 is applied to a plated article, the actual amount of pure gold in the plated article shall be,
(a) where a representation of the proportion and quality of the gold is made, at least 90 per cent of the product obtained by multiplying the fraction referred to in paragraph 7(2)(a) by the quality of the gold represented; or
(b) where no representation of the proportion and quality of the gold is made, in the case of Column I of item 1 of the table to section 7 or 10, at least 90 per cent of 0.0208 fineness.
(1.1) Where a quality mark specified in Column I of item 1 or 2 of the table to section 7 is applied to a plated article that is engraved, brocaded or diamond faceted, the actual amount of pure gold in the plated article shall be
(a) where a representation of the proportion and quality of the gold is made, at least 80 per cent of the product obtained by multiplying the fraction referred to in paragraph 7(2)(a) by the quality of the gold represented; or
(b) where no representation of the proportion and quality of the gold is made, in the case of Column I of item 1 of the table to section 7, at least 80 per cent of 0.0208 fineness.
(2) Where a quality mark specified in Column I of item 4 of the table to section 7 is applied to a plated article, the amount of pure silver in the plated article shall be
(a) where a representation of the proportion of the silver is made, at least 90 per cent of the product obtained by multiplying the fraction applied immediately preceding the quality mark pursuant to subsection 7(5) by 0.925; or
(b) where no representation of the proportion of the silver is made, at least 90 per cent of 0.0925 fineness.
(3) Where a quality mark specified in Column I of item 4 of the table to section 7 is applied to a plated article that is engraved, brocaded or diamond faceted, the amount of pure silver in the plated article shall be
(a) where a representation of the proportion of the silver is made, at least 80 per cent of the product obtained by multiplying the fraction applied immediately preceding the quality mark pursuant to subsection 7(5) by 0.925; or
(b) where no representation of the proportion of the silver is made, at least 80 per cent of 0.0925 fineness.
(4) Subsections (1.1) and (3) do not apply to a precious metal article that is
(a) imported into Canada, or sold by a manufacturer in Canada, prior to March 15, 1982, or
(b) in transit to a dealer in Canada on March 15, 1982,unless the article is marked on or after March 15, 1982.
Read the Precious Metals Marking Regulations on the Justice Laws Website ↗
Made under Precious Metals Marking Act, R.S.C. 1985, c. P-19.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.