Precious Metals Marking Regulations, C.R.C., c. 1303
Section 12
Cite as Precious Metals Marking Regulations, C.R.C., c. 1303, s. 12 · current to July 24, 2025 · regulation last amended June 17, 2019
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
(1) Subject to subsections (2) and (3), every article of hollow ware, other than a Sheffield reproduction article, that is a gold-plated or silver-plated article shall have stamped, branded, engraved or imprinted on it in a legible and conspicuous manner, the name of the base substance or such other word or words that accurately describe the base substance of the article and mount, if any, and the trademark shall be applied in conjunction therewith.
(2) Where 10 per cent or more by weight of the base metal in an article of hollow ware plated with gold or silver is pure nickel, such base metal may be identified by the expression “nickel-silver”, “nickel-argent” or “N.S.”.
(3) Where 90 per cent or more by weight of the base metal in an article of hollow ware that is a plated article is tin, such base metal may be identified by the expression “britannia metal”, “métal anglais”, “white metal”, “métal blanc”, “B.M.” or “W.M.”.
(4) A quality mark specified in Column I of an item of the table to this section may be applied to an article of hollow ware that
(a) is plated with the precious metal specified in Column II of that item; and
(b) meets the requirements specified in Columns III and IV of that item.
(5) Where a quality mark specified in Column I of item 1 or 2 of the table to this section is applied to an article of hollow-ware plated with gold or silver respectively to a thickness of at least one micrometre, a statement of the thickness of the gold or silver expressed as a whole numeral and followed immediately by the word “micrometre”, or the symbol”µm” therefor may be applied to the article in conjunction with the quality mark.TABLEColumn IColumn IIColumn IIIColumn IVQuality MarkPrecious MetalMinimum Quality of Precious Metal in PlatingOther Requirements1“gold electroplate”, “gold plated”, “G.E.P.”, “electro-plaqué d’or” or “or plaqué”Gold10 karats2“silverplate” “silverplated” “silverware”, “E.P.”, “S.P.”, “placage d’argent” “plaqué d’argent” or “argenterie”Silver925 parts by weight in every 1,000 parts pure silver3“Sheffield reproduction” or “reproduction of Sheffield plate”Silver925 parts by weight in every 1,000 parts pure silver(a) base on which plating is done must be nickel or pure copper;(b) a border must be soldered to the edge of the article; and(c) the border and any mounts, whether solid or filled, must be of silver, nickel or copper
Read the Precious Metals Marking Regulations on the Justice Laws Website ↗
Made under Precious Metals Marking Act, R.S.C. 1985, c. P-19.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.