Victoria International Airport Zoning Regulations, C.R.C., c. 121
Section 2
Cite as Victoria International Airport Zoning Regulations, C.R.C., c. 121, s. 2 · current to July 24, 2025 · regulation last amended March 22, 2006
Statute Watch
Get an alert when a bill in Parliament would change this section, and every time it moves.
The text
In these Regulations,
airport means Victoria International Airport, Saanich Peninsula, in the Province of British Columbia; (aéroport)
airport reference point means the point described in Part I of the schedule; (point de repère de l’aéroport)
approach surface means an imaginary inclined plane, the lower end of which is a horizontal line at right angles to the centre line of a strip and passing through a point at the strip end on the centre line of the strip; (surface d’approche)
horizontal surface means an imaginary horizontal plane centering on and located 150 feet above the assigned elevation of the airport reference point; (surface horizontale)
Minister[Revoked, SOR/93-401, s. 2]
strip means a rectangular portion of the landing area of the airport especially prepared for the take-off and landing of aircraft in a particular direction and being
(a) 1,200 feet in width, including the runway, in the case of the runway designated as 08-26, and
(b) 1,000 feet in width, including the runways, in the case of the runways designated as 02-20 and 13-31; (bande)
transitional surface means an imaginary inclined plane extending upward and outward from the outer lateral limits of a strip and its approach surface to an intersection with the horizontal surface or other transitional surfaces. (surface de transition)
Read the Victoria International Airport Zoning Regulations on the Justice Laws Website ↗
Made under Aeronautics Act, R.S.C. 1985, c. A-2.
Bills in Parliament that would change this section 0
No bill we hold would amend or repeal this section.